2020 John Deere W36R

Selling Price -

Click for a Quote

W36R WALK BEHIND MOWER

Information

No Description is Available for this Unit

Photos

Highlights

  • Hatfield
  • Pre-Owned
  • JDW36MT3
  • 2020
  • John Deere
  • W36R
  • 1TCW36RGEKT020007
  • 847
  • Two Hydro-Gear, 0.73-cu in. (10-cc) hydraulic pumps and Danfoss 12 cu-in. (197-cc) wheel motors and ergonomic handles with spring loaded neutral lock
  • Gasoline
  • Available
  • Deflector down: 50 in. (127 cm) | Deflector up for storage: 40 in. (102 cm)
  • 44.8 in. (114 cm) | Cutting: 1.5-4.5 in. (3.8-11.4 cm) / 36 in. (91.4 cm)

Specifications

  • 2020
  • John Deere
  • W36R
  • Base
  • Walking
  • Model: FS481V - California Air Resources Board (CARB)
  • At 3600 rpm: 14.5 hp (10.8 kW)
  • 36.8 cu in. (603 cc)
  • V-twin
  • Electronic
  • Electric start
  • Full pressure
  • Air cooled
  • Paper element with foam precleaner
  • Pump: Vacuum-operated diaphragm | Delivery: Carburetor | Pickup: Top draw
  • Gasoline
  • Shift mechanism: Ergonomic handles with spring-loaded neutral lock
  • Two Hydro-Gear, 0.73-cu in. (10-cc) hydraulic pumps and Danfoss 12 cu-in. (197-cc) wheel motors and ergonomic handles with spring loaded neutral lock
  • Dynamic braking with hand controls, hand lever to set parking brake
  • Motors: Danfoss 12 cu in. 197 cc | Drive: 18x6.5-8
  • 9x3.5-4 semi-pneumatic
  • Hourmeter: Standard, digital | Operator presence starting system: PTO off, park brake engaged, speed lever in neutral
  • 3,600 rpm | Range Forward: 0-7.5 mph (0-12.1 km/h) / Reverse: 0-3 mph (0-4.8 km/h) | Blade: Approximately 18,000 fpm (5,486 m/min)
  • Thickness: 0.25 in. (0.64 cm)
  • 44.8 in. (114 cm) | Cutting: 1.5-4.5 in. (3.8-11.4 cm) / 36 in. (91.4 cm)
  • 18 in. (45.7 cm) | with deck: 76.4 in. (194 cm)
  • Deflector down: 50 in. (127 cm) | Deflector up for storage: 40 in. (102 cm)
  • Tank: 5.4 U.S. gal. (20.4 L)
  • 616 lb (279 kg)
  • Valving: Overhead valves | Governor: Flyweight all speed governor | Hourmeter: Standard, digital | Muffler: Low tone | Blades: Two high-lift | Blade drive: V-belt
  • 10-gauge, 0.14-in. (3.42-mm) fabricated steel deck top with added 10-gauge, 0.14-in. (3.42-mm) spindle mounting plate, 7-gauge, 0.19-in. (4.8-mm) side skirts with reinforcement bar
  • A used warranty may be available. Contact dealer for details.