2021 Pronovost PGV PGV-1021TRC

Information

2021 Pronovost PGV PGV-1021TRC

A break-through in the snow removal world, the concept of the large open flight auger offers the following benefits:

Less snow spillover and leftover on the ground; Less demanding on your engine since the snowblower is easier to turn and, therefore, increases the yield by decreasing fuel consumption; Easier to go through hardened snow or ice; More fun to use!

Features May Include:
  • Renold #100HV chain in oil bath.
  • Auger assembled on quick dismount hub.
  • Drum liner made of Hardox 450.
  • Curved blades impeller.
  • Easy impeller adjustment.
  • Adjustable front 3 point hitch.
  • Speed reducer with or without rotation inverter.
  • Large, open and serrated auger.
  • Easy maintenance.
  • Industrial Yellow color.

Photos

Highlights

  • Eldersburg, Maryland
  • 2021
  • Pronovost
  • PGV PGV-1021TRC
  • Available
  • Cutting: 53" (1346 mm) | Of lateral blades: 59" (1499 mm) or 78" (1981 mm) | Of chute base: 51 1/2" (1308 mm) | Of impeller center: 22 1/4" (565 mm) | of speed reducer shaft: Adjustable from 27 3/8" to 19 1/4"

Specifications

  • 2021
  • Pronovost
  • PGV
  • PGV-1021TRC
  • General
  • Recommended: 200 HP PTO
  • 120 HP PTO
  • Rotor: 1000 RPM
  • Required RPM for the tractor PTO: 540 RPM
  • Approximate performance: 1600 tons imp. / hour | Rotational force (reference): 173 550 lbs-po
  • Category: 2 & 3 - 35" / 889 mm
  • Sides: Plate 1/4" | Back: Plate 10 Gauge
  • Bearing / ductile iron housing: Right : 2 1/2" (64 mm) | Chute rotation maximum angle - Hydraulic motor rotation: 305° | Center of gravity from 3 point hitch at its shortest: 39" (991 mm)
  • 102" (2591 mm)
  • Cutting: 53" (1346 mm) | Of lateral blades: 59" (1499 mm) or 78" (1981 mm) | Of chute base: 51 1/2" (1308 mm) | Of impeller center: 22 1/4" (565 mm) | of speed reducer shaft: Adjustable from 27 3/8" to 19 1/4"
  • 34" (864 mm) | Shaft: 2" (51 mm) | housing contour : Hardox 450: Included 1/4" | Number of impeller blades: 6 - 3/8" thickness
  • Of Drum: 15" (381 mm)
  • Main: 34" (864 mm)
  • 4450 lbs (2019 kg) | Including chute: 4450 lbs( 2019 kg )
  • Drum position: Offset of 6" right | Number of augers: 1 | Drive chain - Main auger: Renold No. 100HV in oil bath | Number of shear bolts: 1 for impeller + 1 for auger
  • Impeller blades: 6