2021 Pronovost PGV PGV-120137TRC
- Year 2021
- Make Pronovost
- Model PGV
2021 Pronovost PGV PGV-120137TRC
2021 Pronovost PGV PGV-120137TRC
A break-through in the snow removal world, the concept of the large open flight auger offers the following benefits:Less snow spillover and leftover on the ground; Less demanding on your engine since the snowblower is easier to turn and, therefore, increases the yield by decreasing fuel consumption; Easier to go through hardened snow or ice; More fun to use!
Features May Include:- Renold #100HV chain in oil bath.
- Auger assembled on quick dismount hub.
- Drum liner made of Hardox 450.
- Curved blades impeller.
- Easy impeller adjustment.
- Adjustable front 3 point hitch.
- Speed reducer with or without rotation inverter.
- Large, open and serrated auger.
- Easy maintenance.
- Industrial Yellow color.
Engine
Engine Power
Recommended: 350 HP PTO
Minimum Engine Power
225 HP PTO
Rated Engine Speed
Rotor: 1000 RPM
PTO
PTO Power, Rated Engine Speed
Required RPM for the tractor PTO: 540 RPM
Operational
Operating Conditions
Approximate performance: 2500 tons imp. / hour | Rotational force (reference): 204 448 lbs-po
Chassis
Hitch/Type
Category: 2 & 3 - 38 3/8" / 975 mm
Frame Type
Sides: Plate 5/16" | Back: Plate 9 Gauge and 3/16
Dimensions
Width, Working Position
118" (2997 mm)
Height
Cutting: 53" (1346 mm) | Of lateral blades: 59" (1499 mm) or 78" (1981 mm) | Of chute base: 54 1/2" ( 1384 mm) | Of impeller center: 24" ( 610 mm) | of speed reducer shaft: Adjustable from 29 7/8" to 18"
Impeller
37" ( 940 mm) | Shaft: 2 1/2" (64 mm) | housing contour : Hardox 450: Included 3/8" | Number of impeller blades: 6 - 3/8" thickness
Depth, Maximum
Of Drum: 15" (381 mm)
Auger Diameter
Main: 34" (864 mm)
Dimensions
Bearing / ductile iron housing: Right : 2 1/2" (64 mm) | Chute rotation maximum angle - Hydraulic motor rotation: 305° | Center of gravity from 3 point hitch at its shortest: 39" (992 mm)
Weights
Weight
5231 lbs (2373 kg) | Including chute: 5231 lbs ( 2373 kg)
Features
Knife Quantity
Impeller blades: 6
Features
Drum position: Offset of 5" right | Number of augers: 1 | Drive chain - Main auger: Renold No. 100HV in oil bath | Number of shear bolts: 1 for impeller + 1 for auger