2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 6" Hydraulic Feed

Information

2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 6" Hydraulic Feed

Why drag the brush to the Chipper? The self-propelled Track Chipper can go almost anywhere. It will fit through most backyard gates, go up or down most any hill and through the thickest of woods. A true labor saving chipper. The Hand Crank, Height Adjustable Chute is standard equipment, as well as the Electric Safety Switch. The engine will not start if the impeller housing is not closed and securely pinned.

The 200 lb. 1" thick, fully balanced impeller has four (4) exhaust paddles and extra wide knife pockets to provide air flow for chip exhaust. The impeller is vented as well to provide even more air flow.

The Track Chipper Transport Trailer is equipped with a Torflex Axle, Heavy Duty Diamond Plate Fenders with Light Enclosures, Flag Holders and a fully D.O.T. approved LED Light Package. Height Adjustable Hitch, 2-5/16" Ball Coupler or 3" Pintle Coupler, Electric Brakes and a Side Wind Jack are some of the other standard features of the Track Chipper Transport Trailer.

Photos

Highlights

  • Eldersburg, Maryland
  • 2020
  • Salsco, Inc.
  • Engine Driven, Hydraulic Feed Chippers 6" Hydraulic Feed
  • Fenders: Extra heavy duty 1/4” thick diamond plate fenders with safety light guards.
  • Available
  • Track Chipper: 2’ 9" | Transport Trailer: 5’ 9”
  • Track Chipper: 7’ 6”

Specifications

  • 2020
  • Salsco, Inc.
  • Engine Driven, Hydraulic Feed Chippers
  • 6" Hydraulic Feed
  • Brush
  • 37HP Briggs & Stratton
  • Centrifugal clutch, size 6 type P
  • Hoses: SAE JIC hose ends & fittings. 3,000 P.S.I. working & 12,000 P.S.I. burst. | Motors: Two (2), CharLynn 29.4 displacement, one (1) Char-Lynn 17.9 displacement.
  • Hydro-Gear, variable speed piston type tandem
  • Two (2), ST225/80R16 LR “E”, 10 Ply
  • 12 volt, CCA 650, automotive type, lockable box
  • Fenders: Extra heavy duty 1/4” thick diamond plate fenders with safety light guards.
  • Single piece welded box construction, 3/8” plate.
  • Adjustable height
  • Infeed Opening: 6” high x 12” wide opening at the infeed. | Infeed Chute: 7 gauge steel | Impeller Housing: 7 gauge steel
  • Exhaust Chute: 360º hand crank, height adjustable exhaust chute with easy adjust exhaust directional flap.
  • 2-5/16” ball or 3” pintle
  • Transport Trailer: 10’
  • Track Chipper: 2’ 9" | Transport Trailer: 5’ 9”
  • Track Chipper: 7’ 6”
  • 20.5 gallon, with lockable filler cap with dip stick.
  • 4.6 gallon, with lockable filler cap with dip stick.
  • 3,500 lb. Torflex
  • Track Chipper: 3,960 lbs. (Approximately) | Transport Trailer: 800 lbs. (Approximately)
  • 5,200 lbs.
  • Jack: Side wind swivel snap ring mount. 2,000 lb. lift
  • 4-bolt, heavy duty, cast iron, greaseable & self-centering
  • Two (2), Bridgestone rubber tracks.