Current Salsco, Inc. Wood-Chippers Engine Driven, Hydraulic Feed Chippers

2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 813XT

2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 813XT

Swipe to View More

  • Year 2020
  • Make Salsco, Inc.
  • Model Engine Driven, Hydraulic Feed Chippers
  • Engine Hatz | Kubota
Shop Salsco, Inc. Pre-Owned
Product Details Specifications Photos
2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 813XT

2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 813XT

  • Year 2020
  • Manufacturer Salsco, Inc.
  • Model Name Engine Driven, Hydraulic Feed Chippers
  • Trim Name 813XT
  • Generic Type (Primary) Brush
  • Engine Hatz | Kubota
  • Emissions Tier IV
  • Engine Power 74HP | 74.3HP

2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 813XT

Features may include:
  • 13” high x 18” wide infeed opening
  • Hydraulic dual feed rolls
  • Live hydraulics
  • Auto reverse speed sensing
  • Hydraulic feed roll lift with down pressure
  • 12,000 lb. heavy duty jack
  • Adjustable height exhaust chute
  • 360° hand crank exhaust chute
  • Easy adjust exhaust flap
  • Full engine enclosure
  • Radiator guards
  • Safety Light Package
  • Impeller Safety Lockout
  • Infeed Tray Safety Apron
  • Infeed Tray Safety Bar
  • Dual Emergency Stops On The Infeed Tray
  • SSS Salsco Safety Shield

Engine

Engine Hatz | Kubota
Emissions Tier IV
Engine Power 74HP | 74.3HP

Drivetrain

Clutch Single plate or double plate over-center clutch depending on horse power for diesel engine options. Autoclutch on PSI gas engines.
Drive System One (1) 5-V single back belt. Cast iron pulleys with taper lock centers.

Hydraulics

Hydraulic Type Hoses: SAE JIC hose ends & fittings. 3,000 P.S.I. working, 12,000 P.S.I. burst. | Motors: Two (2) Eaton Char-Lynn. One (1) Series H, 14.8 Cu.In.Disp, upper feed roll. One (1) 2000 Series, 29.84 Cu.In.Disp., lower feed roll.
Pump Type One (1) Eaton Gear pump, 5/8” 9 tooth spline shaft, 66 Cu.In.Disp.

Wheels & Tires

Tires, Rear Specification Two (2), ST225/80R16 LR “E”, 10 Ply

Battery

Battery 12 v., automotive type, 900 cold cranks. Lockable battery box.

Chassis

Mainframe 2” x 6” X 1/4” wall rectangular steel tubing.
Hitch/Type Adjustable height
Chassis Fenders: 3/8” thick steel diamond plate fenders with light enclosures and flag holders

Dimensions

Adjustability Exhaust Chute: 360º hand crank swivel, height adjustable exhaust chute with easy adjust 12” long directional exhaust flap. Continuous welds & support bar
Dimensions Upper, lower, front & rear housing is 3/8” thick steel. Housings are hinged & held in place by a 13” long x 3/4” diameter pin gauge steel
Coupling 3” pintle
Length 17’ 6”
Width 7’10” | Infeed Tray: 57”
Height 8’ 7” | Infeed Tray: 33”

Capacities

Fuel Capacity 24 gallon steel fuel tank
Hydraulic Capacity 4.6 gallon, with lockable filler cap with dip stick.
Axle Capacity, Rear 7,000 lb. Torflex | 8,000 lb. Torflex

Weights

Weight 8,260 lbs. (Approximately)

Features

Features Jack: 12,000 lb. capacity heavy duty adjustable height, lockable drop leg, greasable with side wind handle.

Product Photography