2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 818

Information

2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 818

Model 818 is a single feed roll unit with an 18" x 18" infeed opening. Designed for mountains of brush and large branches, this chipper feeds up to a rate of 65' per minute, and is almost impossible to keep up with. Horse power options range from 133.27HP - 140HP diesel and gas engine packages with lockable engine enclosures. Live Hydraulics, 12,000 lb. Heavy Duty Jack, Dual 5,500 lb. Capacity Axles, Electric Brakes, Wide Tires, 360º Exhaust Chute and Heavy Duty Fenders with Light Enclosures and Vise Pads, are all part of the standard base unit. Model 818 has dual reversible, sharpenable bed knives and utilizes 1/2" thick double sided chip blades. All tanks and boxes are lockable, and all tanks have drain plugs, and screw caps with dipsticks.

Features may include:
  • Impeller Safety Lockout
  • Infeed Tray Safety Bar
  • Safety Apron On The Infeed Tray
  • Dual Emergency Stops On The Infeed Tray
  • SSS Salsco Safety Shield

Photos

Highlights

  • Eldersburg, Maryland
  • 2020
  • Salsco, Inc.
  • Engine Driven, Hydraulic Feed Chippers 818
  • John Deere
  • Fenders: 3/8” thick steel diamond plate fenders with light enclosures, flag holders and vise mount pads.
  • Available
  • 7’ 6” | Infeed Tray: 57”
  • 8’ 9” | Infeed Tray: 38-5/16”

Specifications

  • 2020
  • Salsco, Inc.
  • Engine Driven, Hydraulic Feed Chippers
  • 818
  • Brush
  • John Deere
  • Tier IV
  • 140HP
  • Double plate over-center clutch on John Deere diesel engine option. Autoclutch on PSI gas engine option.
  • One (1) 5-V single back belt. Cast iron pulleys with taper lock centers.
  • Hoses: JIC hose ends & fittings. 3000 P.S.I. working 12000 P.S.I. burst. | Motors: Two (2) Eaton Char-Lynn. One (1) Series H, 14.8 Cu.In.Disp, upper feed roll. One (1) 2000 Series, 29.84 Cu.In.Disp., lower feed roll.
  • One (1) Eaton Gear pump 5/8” 9 tooth spline shaft 66 Cu.In.Disp.
  • 12” x 16.5” load range “E”.
  • Dual batteries 12 v. automotive type 850CCA in lockable boxes.
  • Fenders: 3/8” thick steel diamond plate fenders with light enclosures, flag holders and vise mount pads.
  • 2” x 6” x 3/8” wall rectangular steel tubing.
  • Adjustable height
  • Infeed Opening: 18” high x 18” wide at the infeed to accept 18” round wood.
  • Exhaust Chute: 360° rotation, fixed height exhaust chute with adjustable chip deflector. No tools necessary to adjust.
  • 3” pintle
  • 21’ 3”
  • 7’ 6” | Infeed Tray: 57”
  • 8’ 9” | Infeed Tray: 38-5/16”
  • 25 gallon lockable steel fuel tank with pick-up screens
  • 16-3/4 gallon steel tank, drain plug, lockable, vented screw cap with dipstick.
  • 5,500 lb. Torflex
  • 9,980 lbs. ( Approximately)
  • Jack: 12,000 lb. capacity heavy duty adjustable height lockable drop leg, greaseable with side wind handle