2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 84 Series

Information

2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 84 Series

The 84 Series Chippers will easily and quickly dispose of any branch up to 4" Round Wood Capacity with little or no prunning. 360º Exhaust Chute and exhaust flap are both easy to adjust and require no tools to adjust direction of processed material.

The 160 lb. Fully Balanced Impeller is 3/4" Thick x 18-7/8" in Diameter with 6 gusseted fan blades to expedite processed material. Extra Wide Knife Pockets and a Vented Impeller Housing greatly increases air flow, improving exhaust of debris.

Engine options include either Kohler or Briggs & Stratton. Simple and efficient to operate and maintain, this unit makes a great addition to the rental store fleet, and the tree care company. It is easily moved around in tight places, such as back yards, golf courses, housing/condo complexes, etc.

Photos

Highlights

  • Eldersburg, Maryland
  • 2020
  • Salsco, Inc.
  • Engine Driven, Hydraulic Feed Chippers 84 Series
  • Briggs & Stratton | Kohler
  • Fenders: Extra heavy duty 1/4” thick diamond plate fenders with safety light guards.
  • Available
  • 5’ | Infeed Tray: 29”
  • 5’ 6” | Infeed Tray: 24”

Specifications

  • 2020
  • Salsco, Inc.
  • Engine Driven, Hydraulic Feed Chippers
  • 84 Series
  • Brush
  • Briggs & Stratton | Kohler
  • 16HP | 25HP
  • Double plate over-center clutch on John Deere diesel engine option. Autoclutch on PSI gas engine option.
  • Heavy duty cast iron pulley and V-Belt system.
  • Hoses: JIC SAE hose ends & fittings. 3,000 P.S.I. working & 12,000 P.S.I. burst. | Motors: 18.7 displacement.
  • Piston type hydrostatic with variable speed
  • Two (2), 175/80D x 13, LR “C” 6 ply
  • 12 volt, CCA 230, automotive type
  • Fenders: Extra heavy duty 1/4” thick diamond plate fenders with safety light guards.
  • 1-1/2” x 2” x 1/8” wall, rectangular steel tube, with cross beam for extra strength, continuous welds and gusseted.
  • Infeed Opening: 4” x 8” opening at the infeed. | Impeller Housing: 1/4” thick steel, impeller housing is vented to provide more air flow for chip exhaust.
  • Exhaust Chute: 360° rotation, fixed height exhaust chute with adjustable chip deflector. No tools necessary to adjust.
  • 2” bal
  • 7’
  • 5’ | Infeed Tray: 29”
  • 5’ 6” | Infeed Tray: 24”
  • 25 gallon lockable steel fuel tank with pick-up screens
  • 2.6 gallon, with lockable filler cap with dip stick.
  • 1,800 lb. Torflex Idler
  • 1,420 lbs. (Approximately)
  • Jack: 2,000 lb. capacity top-wind
  • 4-bolt, heavy duty, cast iron, greaseable & self-centering.