Current Salsco, Inc. Wood-Chippers Engine Driven, Hydraulic Feed Chippers

2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 86 Series

2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 86 Series

Swipe to View More

  • Year 2020
  • Make Salsco, Inc.
  • Model Engine Driven, Hydraulic Feed Chippers
  • Engine Kohler | Briggs & Stratton
Shop Salsco, Inc. Pre-Owned
Product Details Specifications Photos
2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 86 Series

2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 86 Series

  • Year 2020
  • Manufacturer Salsco, Inc.
  • Model Name Engine Driven, Hydraulic Feed Chippers
  • Trim Name 86 Series
  • Generic Type (Primary) Brush
  • Engine Kohler | Briggs & Stratton
  • Emissions Tier IV
  • Engine Power 25HP | 37HP

2020 Salsco, Inc. Engine Driven, Hydraulic Feed Chippers 86 Series

The 86 Series Chippers are available with either a 25HP Gas, Kohler or a 37HP Gas E.F.I. Briggs & Stratton engine. These units can easily handle any 6" diameter branch with limbs. No need to do all that pruning; the infeed is 12" wide x 6" high. The 360º exhaust chute and the chip deflector are easily adjusted and no tools are necessary. These units have double bed knives, one vertical and one horizontal. Evergreens, palm fronds and vines are easily chipped and will not wrap around the impeller shaft as long as the bed knives are properly adjusted.

The 200 lb. fully balanced impeller is 1" thick x 26" in diameterwith 6 gusseted fan blades to expedite processed material. Extra wide knife pockets and a vented impeller housing increases air flow, greatly improving exhaust of chipped material.

Engine

Engine Kohler | Briggs & Stratton
Emissions Tier IV
Engine Power 25HP | 37HP

Drivetrain

Clutch Size 6, Type P, centrifugal
Drive System One (1) 5-V single back belt. Cast iron pulleys with taper lock centers.

Hydraulics

Hydraulic Type Hoses: JIC SAE Hose ends & fittings. 3,000 P.S.I. working & 12,000 P.S.I. burst. | Motors: Char-Lynn 17.9 displacement.
Pump Type Sunstrand, piston type, variable speed.

Wheels & Tires

Tires, Rear Specification Two (2), ST205/75D14, LR “C”, 6 ply
Wheels 6-bolt white spoke wheel.

Battery

Battery 12 volt, CCA350, automotive type

Chassis

Mainframe 3” x 2” x 1/4” wall, rectangular steel tube, with cross beam for extra strength, continuous welds and gusseted.
Hitch/Type Adjustable height
Chassis Fenders: 3/8” thick steel diamond plate fenders with light enclosures, flag holders and vise mount pads.

Dimensions

Adjustability Exhaust Chute: 360º swivel exhaust chute and exhaust flap are both quickly and easily adjusted to direct exhaust with no tools.
Dimensions Infeed Opening: 6” x 12” opening at the infeed | Impeller Housing: 1/4” thick steel, impeller housing is vented to provide more air flow for chip exhaust.
Coupling 2” ball
Length 9’ 1”
Width 6’ 6” | Infeed Tray: 40”
Height 7’ 6” | Infeed Tray: 23”

Capacities

Fuel Capacity 6 gallon CARB approved canister
Hydraulic Capacity 4 gallon, with lockable filler cap with dip stick.
Axle Capacity, Rear 3,500 lb. Torflex

Weights

Weight 2,120 lbs. (Approximately)

Features

Bearing Hanger Type 4-bolt, heavy duty, cast iron, greaseable & self-centering.
Features Jack: 2,000 lb. capacity top-wind

Product Photography