2020 Salsco, Inc. PTO, Hydraulic Feed Chippers 810PTO

Information

2020 Salsco, Inc. PTO, Hydraulic Feed Chippers 810PTO

The 810PTO is the PTO version of our Model 810 engine driven chipper. 6,000 lb. Torflex Idler Axle is Standard, however an Over the Road 6,000 lb. Torflex Axle with Electric Brakes is Available as an Option. It has all the heavy duty specifications as Model 810, and only requires only 35HP at the PTO. The hydraulics are fully self-contained so no oil is required from the tractor.

This is a single feed wheel unit, with an Extra Large 18" Wide x 10" High Infeed Opening to accommodate brushy material as well as 10" round limbs. Heavy duty Slip Clutch Drive Shaft with Shield, Rated at 80HP @ 1,000 R.P.M. is Standard Equipment.

10" branches, vines and piles of brush, are no problem for this rugged unit.

Photos

Highlights

  • Eldersburg, Maryland
  • 2020
  • Salsco, Inc.
  • PTO, Hydraulic Feed Chippers 810PTO
  • Fenders: Extra heavy duty 1/4” diamond plate with safety light guards
  • Available
  • 5’ 5” | Infeed Tray: 33”
  • 7’ 7” | Infeed Tray: 57”

Specifications

  • 2020
  • Salsco, Inc.
  • PTO, Hydraulic Feed Chippers
  • 810PTO
  • Brush
  • Two (2) ST225/75R15, 8 ply
  • 6-bolt white spoke
  • Hoses: SAE JIC hose ends & fittings. | Motor: Char-Lynn, 11.3 displacement
  • Sunstrand, 62 cu.in, control valve with relief valve.
  • Fenders: Extra heavy duty 1/4” diamond plate with safety light guards
  • 2” x 4” rectangular tubing with support gussets and continuous welds for strength.
  • Farm
  • Infeed Opening: 10” x 18” opening at the infeed | Impeller Housing: 7 gauge steel
  • Exhaust Chute: 360º swivel exhaust chute and exhaust flap are both quickly and easily adjusted to direct exhaust with no tools. (270º stop available, if required)
  • 11’
  • 5’ 5” | Infeed Tray: 33”
  • 7’ 7” | Infeed Tray: 57”
  • 3.5 gallon, with lockable filler cap with dip stick.
  • 3,840 lbs.
  • 4-bolt, heavy duty, cast iron, greaseable & self-centering.